FIBARO SMART IMPLANT FGBS-222, Руководство по эксплуатации

Страница: 14 / 38

14
4: InstallatIon
4.9: Connection with gate opener
Smart Implant can be connected to different devices to control
them. In this example it is connected to gate opener with im-
pulse input (every impulse will start and stop the gate motor,
alternately opening/closing)
1. Disconnect power.
2. Connect with the diagram below:
OUT1
IN1
GND
P
START/STOP
GND
2
1
GND 9-30V
Diagram 9: Example gate opener
(1 – monostable button, 2 – gate opener controller)
3. Verify correctness of connection.
4. Power the device.
5. Add the device to the Z-Wave network.
6. Change values of parameters:
• Connected to IN1 and OUT1:
» Change parameter 20 to 2 (monostable button)
» Change parameter 156 to 1 (0.1s)
• Connected to IN2 and OUT2:
» Change parameter 21 to 2 (monostable button)
» Change parameter 157 to 1 (0.1s)