8
EXTRA TEMPERATURE SENSOR
To
pair
the FGBRS-001 with the device:
1. Use the included key to press and hold the button.
2. Release the button when you see
blue
LED colour.
3. Click the button to con
fi
rm the selection, the LED ring will start
blinking blue.
4. Within 1 minute click button on the sensor.
5. The LED ring on thermostatic head will blink to con
fi
rm the result:
• 5 times green – sensor paired successfully,
• 5 times red – sensor not paired.
6. Place the sensor in same room as head, no further than 5 meters
from it.
#6: Extra temperature sensor
The device can be used with an additional, dedicated temperature
sensor (FGBRS-001) to provide the best temperature regulation.
It can be placed anywhere in the room and the device will use it as a
reference point for the room temperature.
Before using, the sensor must be paired with the thermostatic head.
One thermostatic head can be paired with only one sensor, but one
sensor can be paired with up to three thermostatic heads.
NOTE
FGBRS-001 is the only
compatible tempera-
ture sensor.
i
To
remove
all
paired heads
from the sensor’s memory:
1. Press and hold the button on the sensor for 2 seconds.
2. The LED on the sensor will blink 3 times to con
fi
rm unpairing.
CAUTION
This product is not a
toy. Keep away from
children and animals!
!
