7
CONTROLLING THE TEMPERATURE
#5: Controlling the temperature
You can set temperature using app (10-30°C) or directly on the device
(16-24°C).
During manual temperature change LED ring colour corresponds to
the temperature set-point.
To check and change the temperature on the device:
1. Bring your hand close to the sphere.
2. LED ring will:
• Glow if temperature was set manually,
• Pulse slowly if device is in schedule mode,
• Pulse quickly if device is in override schedule mode.
With colour depending on set temperature:
3. Turn the sphere counter-clockwise to lower temperature or turn
clockwise to raise the temperature.
4. Remove the hand from the sphere, after 5 seconds LED will fade
and new temperature will be set.
Z-Wave Mode
Temperature [°C]
Colour
OFF
Valve closed
(anti-freeze)
White
HEAT
16°C or lower
Blue
17°C
Azure
18°C
Cyan
19°C
Spring green
20°C
Green
21°C
Chartreuse
22°C
Yellow
23°C
Orange
24°C or higher
Red
MANUFACTURER
SPECIFIC
Valve fully opened
Magenta
Lower temperature
Raise temperature
NOTE
If device is currently
during normal sched-
ule, setting tempera-
ture manually will set
Override
Schedule
(see “Override Sched-
i
