14
FACTORY RESET
Reset procedure allows to restore the device back to its factory set-
tings, which means all information about the network and user con-
fi
guration will be deleted.
#12: Factory reset
To perform factory reset:
1. Use the included key to press and hold the button.
2. Release the button when you see
yellow
LED colour.
3. Click the button to con
fi
rm the selection.
4. After
fi
nishing resetting the device will be put in Standby Mode.
Click the button to activate it again.
NOTE
Resetting the device is
not the recommend-
ed way of removing
the device from the
Z-Wave network. Use
the reset procedure
only if the primary
controller is missing or
inoperable.
i
