FIBARO FGRGBW-442, Руководство по эксплуатации, Страница: 15 / 38

15
operatIng the DevIce
Other actions
• 1,2,3xclick/hold/release – activate scene in the controller for spe-
cific action (requires prior configuration)
7.2: Visual indications
The built-in LED light shows current device status.
After powering the device:
• Green – device added to a Z-Wave network (without Security S2
Authenticated)
• Magenta – device added to a Z-Wave network (with Security S2
Authenticated)
• Red – device not added to a Z-Wave network
Update:
• Blinking cyan – update in progress
• Green – update successful
• Red – update not successful
Menu:
• Blinking green – entering the menu (added without Security S2
Authenticated)
• Blinking magenta – entering the menu (added with Security S2
Authenticated)
• Blinking red – entering the menu (not added to a Z-Wave network)
• Green – reset energy consumption memory
• Yellow – reset to factory defaults
7.3: Menu
Menu allows to perform Z-Wave network actions. In order to use the
menu:
1. Press and hold the service button to enter the menu, device blinks
to signal adding status (see 7.2: Visual indications).
2. Release the service button when device signals desired position
with colour:
• GREEN - reset energy consumption memory
• YELLOW - reset to factory defaults
3. Quickly click the service button to select, 2 blinks of the same
colour will confirm the selection.