Fiat SEDICI, Руководство пользователя

Страница: 156 / 266

155
USING THE
TRANSAXLE
77J021
77J028
Gearshift lever
4- Speed Automatic Transaxle
The remote controller is a
sensitive electronic instru-
ment. To avoid damaging it, do not
expose it to impacts, moisture or high
temperature (such as on the dash-
board under direct sunlight).
WARNING
You can also turn the ignition switch by
inserting the ignition key into the slot.
If you leave any of the doors open with the
ignition switch in the “ACC” position for
a while (and no key inserted), the engine
may not start when you turn the ignition
switch to “START”. If the engine does not
start, close all doors completely or turn
the ignition switch back to the “LOCK”
position, then start the engine.
Always depress the brake
pedal before shifting from
“P” (Park) (or “N” (Neutral) if the ve-
hicle is stationary) to a forward or re-
verse gear, to help prevent the vehi-
cle from moving unexpectedly when
you shift.
WARNING
Use the gearshift lever positions as de-
scribed below:
P (Park)
Use this position to lock the transaxle
when the vehicle is parked or when start-
ing the engine. Shift into Park only when
the vehicle is completely stationary.
R (Reverse)
Use this position to reverse the vehicle
from stop. Make sure that vehicle is com-
pletely stationary before shifting into Re-
verse.
N (Neutral)
Use this position for starting the engine
if the engine stalls and you need to restart
it while the vehicle is moving. You may al-
so shift into Neutral and depress the brake
pedal to hold the vehicle stationary dur-
ing idling.
149-166 Fiat16 New GB 3-09-2008 10:41 Pagina 155