Fiat Qubo, Руководство пользователя

Страница: 109 / 196

for vehicles with allow wheels,
remove the adapter D fig. 121 and
introduce the bracket into the adapter
D, insert the pin into the hole and
secure with the knob F;
position the wheel vertically and rest
the fitted adaptor on the inside of the
rim, then using the screws provided fix
the wheel to the adaptor fig. 122.
Tighten the screws with the wheel
spanner;
check replaced wheel positioning
under the floor (the lifting system is
supplied with a clutch to limit the end of
the stroke). Incorrect positioning may
jeopardise safety;
lift the wheel by fastening the bolt A
fig. 112;
put jack and tools back in the
specific tool bag;
reposition the tool bag in the boot;
secure the tool box to the hooks.
WARNING
104)
The spare wheel (for versions/
markets, where provided) is specifically for
your vehicle. Therefore, it must not be
used on other models. Do not use spare
wheels of other models on your vehicle.
The spare wheel must be used only in an
emergency. Use of the spare wheel must
be strictly reduced to the necessary
minimum.
105)
Use your hazard lights, warning
triangle, etc to show that your vehicle is
stationary. Passengers should get out
of the vehicle, particularly if it is heavily
loaded, and wait for the wheel to be
changed away from the traffic. If you are on
a slope or uneven surface, place wedges
or other suitable objects under the wheels
to secure the vehicle. Have the wheel
repaired and refitted as soon as possible.
Do not apply grease to the bolt threads
before fitting: they could come unscrewed.
106)
Use the jack only to replace wheels
on the vehicle with which it is supplied
or on other vehicles of the same model.
Never use the jack for other purposes,
such as lifting other models. Never use the
jack to carry out repairs under the vehicle.
Incorrect positioning of the jack may cause
the lifted vehicle to fall. Do not use the
jack for loads higher than the one shown
on its label.
107)
Incorrect hub cap assembly may
cause it to come off when the vehicle is
moving. Never tamper with the inflation
valve. Never introduce tools of any kind
between rim and tyre. Check tyre and
space-saver spare wheel pressures
regularly, referring to the values shown in
the "Technical data" chapter.
120
F0T0924
121 F0T0925
122
F0T0926
107