Fiat 500c 2017, Руководство пользователя

Страница: 94 / 180

Here’s How:
1
.
Push the Uconnect Phone button and wait for the beep, then say “reply
.
”
Uconnect will give the following prompt: “Please say the message you would like to
send
.
”
2 . Wait for the beep and say one of the pre-defined messages . (If you are not sure, you
can say “help”)
.
Uconnect will then read the pre-defined messages allowed
.
3 . As soon as you hear the message you would like to send, you can interrupt the list of
prompts by pushing the Uconnect phone button and saying the phrase
. Uconnect will
confirm the message by reading it back to you .
4 . Push the Phone button and say “send . ”
PRE-DEFINED VOICE TEXT REPLY RESPONSES
Yes . Stuck in traffic . See you later .
No
.
Start without me
.
I’ll be late
.
Okay
.
Where are you?
I will be <5, 10, 15,
...
etc
.
>
minutes late .
Call me . Are you there yet?
I’ll call you later . I need directions .
See you in <5, 10, 15, ... etc . >
of minutes .
I’m on my way .
Can’t talk right now .
I’m lost
.
Thanks
.
NOTE:
To make the SMS voice reading function available, the SMS notification option on your
phone must be enabled; this option is usually available on the phone, in the Bluetooth
connections menu for a device registered as Uconnect
.
After enabling this function on
the mobile phone, it must be disconnected and reconnected with the Uconnect system
in order to make it effective
.
Helpful Tips And Common Questions To Improve Bluetooth Performance
With Your Uconnect System
Mobile Phone won’t reconnect to system after pairing:
• Set mobile phone to auto-connect or trusted device in mobile phone Bluetooth set-
tings (Blackberry devices)
.
• Perform a factory reset on your mobile phone . Refer to your mobile phone manufac-
turer or cellular provider for instructions .
• Many mobile phones do not automatically reconnect after being restarted (hard re-
boot)
.
Your mobile phone can still be connected manually
.
Close all applications that
may be operating (refer to mobile phone manufacturer’s instructions), and follow “Pair-
ing (Wirelessly Connecting) Your Mobile Phone To The Uconnect System”
.
Mobile Phone won’t pair to system:
• Perform a hard reset in the mobile phone by removing the battery (if removable —
see your mobile phone’s owner manual) .
ELECTRONICS
92