Fiat 500c 2017, Руководство пользователя

Страница: 108 / 180

ESC Full Off
This mode is intended for off-highway or off-road use only and should not be used on
public roadways
. In this mode, all TCS and ESC stability features are turned OFF, except
for the limited slip feature described in the TCS section
.
To enter the “Full Off” mode,
push and hold the ESC OFF switch for five seconds
.
After five seconds, the ESC OFF
Indicator Light will illuminate, and the “ESC OFF” message will display in the instrument
cluster display
. To turn ESC ON again, momentarily push the ESC OFF switch .
– Park/Headlight ON Indicator
This indicator will illuminate when the park lights or headlights are turned on .
– Power Steering System Warning
This light is used to manage the electrical warning of the EPS (Electric Power Steering
System)
. When the ignition is turned to the ON/RUN position, the warning light will illu-
minate momentarily
.
If the warning light stays on, cycle the ignition to the OFF position
and back to ON/RUN . If the warning light stays on, contact your authorized dealer .
If the warning light switches on while driving, you may not have steering assistance
.
Although it will still be possible to steer the car, the effort needed to operate the
steering wheel could be increased: contact an authorized dealer as soon as possible
.
– Defroster Indicator
Indicates that defroster is on .
Change Engine Oil
Your vehicle is equipped with an engine oil change indicator system . The “Change Engine
Oil” message will flash in the instrument cluster display for approximately 10 seconds
after a single chime has sounded to indicate the next scheduled oil change interval
.
The
engine oil change indicator system is duty cycle based, which means the engine oil change
interval may fluctuate, dependent upon your personal driving style
.
Unless reset, this message will continue to display each time you turn the ignition switch
to the ON/RUN position
. To turn off the message temporarily, push and release the
MENU button
.
To reset the oil change indicator system (after performing the scheduled
maintenance), refer to the following procedure:
1 . Turn the ignition switch to the ON position (Do not start the engine) .
2 . Fully depress the accelerator pedal slowly, three times within 10 seconds .
3
.
Turn the ignition switch to the OFF/LOCK position
.
NOTE:
If the indicator message illuminates when you start the vehicle, the oil change indicator
system did not reset
.
If necessary, repeat this procedure
.
WHAT TO DO IN EMERGENCIES
106