Road Tire Installation
Vehicles Equipped With Wheel Covers
1
.
Mount the road tire on the axle
.
2
.
Install the spare wheel and hand start the wheel bolts
.
WARNING!
To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel bolts fully
until the vehicle has been lowered
.
Failure to follow this warning may result in personal
injury
.
3
.
Lower the vehicle to the ground by turning the jack handle counterclockwise
.
4
.
Finish tightening the wheel bolts
.
Push down on the wrench while at the end of the
handle for increased leverage
.
Tighten the wheel bolts in a star pattern until each bolt
has been tightened twice
.
The correct Torque Specifications are 66 Ft-Lbs (90 N-m)
for Steel Wheels and 74 Ft-Lbs (100 N-m) for Aluminum Wheels
.
If in doubt about
the correct tightness, have them checked with a torque wrench by your authorized
dealership or service station
.
5
.
After 25 miles (40 km) check the wheel bolt torque with a torque wrench to ensure
that all wheel bolts are properly seated against the wheel
.
6
.
Align the valve notch in the wheel cover with the valve stem on the wheel
.
Install the
cover by hand
.
Do not use a hammer or excessive force to install the cover
.
WHAT TO DO IN EMERGENCIES
115
Содержание 500c 2017
