Fiat 500c 2017, Руководство пользователя

Страница: 51 / 180

EZ Entry Feature
The driver and front passenger seats have an EZ entry feature for rear seat passengers .
1
.
Pull forward on the release lever located on the outboard side of the seatback
.
2 . Dump the seatback forward .
3 . Slide the seat forward to allow access in and out of the rear seat .
Lift the seatback upright and push the seat
rearward to its locked position once the
rear passengers are seated
.
Memory Feature
Both front seats have a memory feature,
which can operate in two ways:
Memory Function Option 1 — Full Seat Back
And Track Fore/Aft Position Memory:
After using the EZ entry function, the seat-
back angle and the track fore/aft adjuster
can both re-lock into the position they
were most recently adjusted to
. This is ac-
complished if the seat is moved fully rear-
ward to its last fore/aft position on the
tracks before the seat back is returned upright
.
Memory Function Option 2 — Seat Back Only Memory:
After using the EZ entry function, the seat back may first be returned upright prior to
going back to the last fore/aft (memory) position on the tracks
. This results in the seat
back memory being set only – The track will then be locked forward of its last set fore/
aft memory position
.
To then reset the fore/aft track memory feature (to reestablish
Memory Function Option 1), the seat has to be returned fully rearward to its last fore/
aft memory track position as described in Memory Function Option 1
.
EZ Entry Lever
GETTING STARTED
49