5
.
Try to pull the webbing out of the retractor
.
If it is locked, you should not be able to
pull out any webbing
.
If the retractor is not locked, repeat the last step
.
6
.
Finally, pull up on any extra webbing to tighten the lap portion around the child re-
straint while you push the child restraint rearward and downward into the vehicle
seat
.
7
.
If the child restraint has a top tether strap and the seating position has a top tether
anchorage, connect the tether strap to the anchorage and tighten the tether strap
.
See below for directions to attach a tether anchor
.
8
.
Test that the child restraint is installed tightly by pulling back and forth on the child
seat at the belt path
.
It should not move more than 1 inch (25
.
4 mm) in any direc-
tion
.
Installing The Top Tether Strap (With Either Lower Anchors Or Vehicle
Seat Belt):
When installing a forward-facing child restraint, always secure the top tether strap, up to
the tether anchor weight limit, whether the child restraint is installed with the lower an-
chors or the vehicle seat belt
.
1
.
Route the tether strap to provide the most direct path for the strap between the
anchor and the child seat
.
2
.
If your vehicle is equipped with adjustable rear head restraints, raise the head restraint,
and where possible, route the tether strap under the head restraint and between the
two posts
.
If not possible, lower the head restraint and pass the tether strap around
the outboard side of the head restraint
.
3
.
Attach the tether strap hook of the child restraint to the top tether anchorage and
remove slack in the tether strap according to the child restraint manufacturer’s instruc-
tions
.
GETTING STARTED
26
Содержание 2014 500e
Страница 1: ...2 014 USER GUIDE ...
Страница 75: ...UNDERHOOD COMPARTMENT MAINTAINING YOUR VEHICLE 73 ...
Страница 90: ...NOTES 88 ...