ECO
•
The Driver Behavior Gauge will move into the ECO range when you are maximizing
the driving range of the high voltage battery
.
Charge
•
The Driver Behavior Gauge will move into the Charge range when battery regenera-
tion is active (either coasting or braking)
.
TURN SIGNAL/LIGHTS/HIGH BEAM LEVER
Turn Signal/Lane Change Assist
•
Tap the lever up or down once and the
turn signal (right or left) will flash three
times to indicate a lane change and auto-
matically turn off
.
Headlights/Parking Lights
•
Rotate the end of the lever to the first
detent for parking lights and headlight
operation
.
NOTE:
The ignition switch must be in the ON/RUN
position for the headlights to operate
.
High Beams
•
Push the lever forward to activate the high beams
.
•
A high beam symbol will illuminate in the cluster to indicate the high beams are on
.
NOTE:
For safe driving, turn off the high beams when oncoming traffic is present to prevent
headlight glare and as a courtesy to other motorists
.
Flash To Pass
•
Pull the lever toward you to activate the high beams
.
The high beams will remain on
until the lever is released
.
Turn Signal/Lights Lever
OPERATING YOUR VEHICLE
34
Содержание 2014 500e
Страница 1: ...2 014 USER GUIDE ...
Страница 75: ...UNDERHOOD COMPARTMENT MAINTAINING YOUR VEHICLE 73 ...
Страница 90: ...NOTES 88 ...