Fiat 2014 500e, Руководство пользователя

Страница: 23 / 92

VEHICLE SECURITY ALARM
This Vehicle Security Alarm monitors the doors, liftgate, and ignition switch for unauthor-
ized operation
.
When the alarm is activated, the interior switches for door locks are disabled
.
The Vehicle
Security Alarm provides both audio and visual signals repeatedly for three minutes
.
If the
disturbance is still present (driver's door, passenger door, other doors, ignition) after three
minutes, the parking lights and tail lights will flash for an additional 15 minutes
.
To Arm:
• Press the Key Fob LOCK button
.
To Disarm The System:
• Push the Key Fob UNLOCK button or cycle the ignition to the ON/RUN position
.
The Vehicle Security Alarm is designed to protect your vehicle; however, you can create
conditions where the Vehicle Security Alarm will give you a false alarm
.
If one of the pre-
viously described arming sequences has occurred, the Vehicle Security Alarm will arm re-
gardless of whether you are in the vehicle or not
. If you remain in the vehicle and open
a door, the alarm will sound . If this occurs, disarm the Vehicle Security Alarm .
If the Vehicle Security Alarm is armed and the battery becomes disconnected the Vehicle
Security Alarm will remain armed when the battery is reconnected
.
The exterior lights
will flash, and the horn will sound
.
If this occurs, disarm the Vehicle Security Alarm
.
POWER DOOR LOCKS
• The vehicles power door locks are activated by moving the inside door handles .
• Push or pull the driver’s door handle to lock or unlock the doors and liftgate when
the doors are closed .
SEAT BELT
Be sure everyone in your vehicle is in a seat and using a seat belt properly
.
• Position the lap belt across your thighs, below your abdomen
.
To remove slack in the
lap portion, pull up a bit on the shoulder belt . To loosen the lap belt if it is too tight,
tilt the latch plate and pull on the lap belt
.
A snug belt reduces the risk of sliding
under the belt in a collision .
• Position the shoulder belt on your chest so that it is comfortable and not resting on
your neck . The retractor will withdraw any slack in the belt .
A shoulder belt placed behind you will not protect you from injury during a collision .
You are more likely to hit your head in a collision if you do not wear your shoulder belt .
The lap and shoulder belt are meant to be used together .
A belt that is too loose will not protect you properly
.
In a sudden stop you could move
too far forward, increasing the possibility of injury
.
Wear your seat belt snugly
.
GETTING STARTED
21