Increasing the stored speed
This can be carried out in two ways:
❒
by pressing the accelerator and storing the new
speed reached
or
❒
by moving the stalk upwards (+).
Each movement of the stalk corresponds to an
increase in speed of about 1 km/h, while keeping the
stalk held upwards will continuously increase the
speed.
Decreasing the stored speed
This can be carried out in two ways:
❒
by switching off the device and then storing the
new speed;
or
❒
by moving the stalk downwards (-) until the new
speed, which will be stored automatically, is
reached.
Each movement of the lever corresponds to a
reduction in speed of about 1 km/h, while keeping
the stalk held downwards will decrease the speed
continuously.
Deactivating the device
The device can be deactivated by the driver in the
following ways:
❒
by turning ring nut A to the OFF position
❒
by stopping the engine
Deactivating the function
The device can be deactivated by the driver in the
following ways:
❒
by turning ring nut A to the OFF position
❒
by stopping the engine
❒
by pressing the brake pedal or operating the
handbrake
❒
by pressing the clutch pedal
❒
requesting a gear shift with an automatic
transmission in sequential mode
❒
with the vehicle speed below the set limit
❒
by pressing the accelerator pedal; in this case the
system is not actually turned off but the
acceleration request takes priority; the cruise
control remains activated, without the need to
press the RES button to restore the previous
conditions once the acceleration is over.
The device is automatically switched off in the
following cases:
❒
if the ABS or ESP systems cut in;
❒
in the event of system failure.
75
KNOW YOUR
VEHICLE
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
Содержание 2013 Ducato 250
