Fiat 2013 Ducato 250, Руководство пользователя

Страница: 159 / 331

USING THE GEARBOX
To engage the gears, press the clutch pedal fully and
put the gear lever into the required position (the
diagram is shown on the knob fig. 163).
To engage 6th gear (where provided), operate the
lever by pressing it towards the right in order to
avoid engaging 4th gear by mistake. The action
is similar for shifting from 6th gear to 5th gear.
IMPORTANT Reverse may only be engaged when the
vehicle is at a standstill. With the engine running,
wait for at least 2 seconds with the clutch pedal fully
pressed before engaging reverse to prevent damage
to the gears and grating.
To engage reverse R from neutral, proceed as
follows: raise ring A under the knob and at the same
time move the gear lever to the right and then
backwards.
WARNING
Press the clutch pedal fully to change
gears correctly. It is therefore essential
that there is nothing under the pedals: make
sure the mats are lying flat and do not get
in the way of the pedals.
Do not drive with your hand resting on
the gear lever as the force exerted, even if
slight, could lead over time to premature
wear of the gearbox internal components.The
clutch pedal should be used only for gear
changes. Do not drive with your foot resting on
the clutch pedal, however lightly. For versions/
markets where provided, the electronic clutch
control could cut in, interpreting the incorrect
driving style as a fault.
fig. 163
F0N0074
155
KNOWYOUR
VEHICLE
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX