Fiat 2013 Ducato 250, Руководство пользователя

Страница: 25 / 331

The setup menu environment is timed; when the
menu is exited due to expiry of the time allowed,
only the changes already stored by the user
(confirmed beforehand by a brief press of the MODE
button) will be saved.
From the standard screen, briefly press button
MODE to start navigation.
Press the
or buttons to navigate within the
menu.
Note Only the reduced menu can be accessed while
the vehicle is moving for safety reasons ("Speed
Beep" setting). Stop the vehicle to access the full
menu.
Speed limit (Speed Beep)
This function can be used to set a vehicle speed limit
(km/h or mph). The driver is alerted when this
limit is exceeded (see "Warning lights and
messages").
To set the desired speed limit, proceed as follows:
- briefly press the MODE button: the display will
show the wording (Speed Beep);
- press the
or button to select speed limit
activation (On) or deactivation (Off );
- if the function has been activated (On), press the
or buttons to select the desired speed limit and
then press MODE to confirm.
Note Setting is possible between 30 and 200 km/h,
or 20 and 125 mph, according to the previously
set unit. See the "Setting the unit of measurement
(Measurement unit)" paragraph described below. The
setting will increase/decrease by 5 units each time
button
/ is pressed. Hold down the / button
to automatically increase/decrease the setting rapidly.
Complete the adjustment with single presses of the
button when you approach the desired value.
- press the MODE button briefly to return to the
menu screen or hold the button down to return to
the standard screen without storing.
To cancel the setting, proceed as follows:
- press the MODE button briefly to make the display
flash (On);
- press the
button: (Off ) will flash on the display;
- briefly press the MODE button to go back to
the menu screen or hold the button down to go
back to the standard screen without saving.
Headlight sensor sensitivity adjustment
(for versions/markets, where provided)
This function allows you to adjust the headlight
sensor sensitivity to 3 levels.
To set the desired sensitivity level, proceed as
follows:
– briefly press the MODE button: the previously set
sensitivity “level” starts to flash on the display;
– press the
or button to adjust;
21
KNOW YOUR
VEHICLE
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX