Fiat 2013 Ducato 250, Руководство пользователя

Страница: 58 / 331

USING THE CLIMATE CONTROL SYSTEM
The system can be started in different ways, but it is
advisable to start by pressing the AUTO button
and then turning the knob to set the temperature
required on the display. The system will start running
automatically in this way and the set temperature
will be reached as quickly as possible. The system will
adjust the temperature, the quantity and the
distribution of the air sent into the passenger
compartment and, by managing the recirculation
function, the activation of the compressor. During
fully automatic operation the only manual
intervention required is the possible activation of the
following functions:
❒
air recirculation, to keep the function always
either on or off;
❒
to speed up demisting/defrosting of
windscreen, rear window and external rear view
mirrors.
During fully automatic system operation, you can
change the set temperatures, air distribution and fan
speed at any time by using the relevant buttons or
knobs: the system will automatically change its
settings to adjust to the new requirements. During
fully automatic operation (FULL AUTO), the word
FULL will disappear if the air distribution and/or flow
rate and/or engagement of the compressor and/or
recirculation settings are changed. In this way, the
functions will switch from automatic to manual
control until the AUTO button is pressed again.
With one or more functions turned on manually, the
adjustment of the intake air temperature continues
to be managed automatically, except with the
compressor switched off: if this is the case, the
temperature of the air sent into the passenger
compartment cannot be lower than that of the
outside air.
CONTROLS
Air temperature adjustment knob (I)
Turn the knob either clockwise or counterclockwise
to increase or lower the requested temperature in
the passenger compartment.
The temperature set is shown on the display.
Turn the knob either fully to the right or fully to the
left to the extreme HI or LO position to turn the
maximum heating or maximum cooling functions on:
❒
HI function (maximum heating): select by turning
the temperature knob clockwise beyond the
maximum value (32°C).
fig. 54
F0N0831
54
KNOW YOUR
VEHICLE
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX