23
Problem
Possible Cause
Possible Solution
Auger will not rotate
Hoses installed incorrectly
Switch quick coupler fittings
Hydraulic valve on skid steer not engaged
See skid steer operator's manual for auxiliary
operation procedure
Worn, damaged, insufficient or inadequate pump
Repair or replace hydraulic pump
Insufficient oil in system
Service the skid steer hydraulic reservoir, see
skid steer operator's manual
Hose ends not completely engaged
Check hose couplings and engage properly
Air in hydraulic lines
Cycle skid steer auxiliary system several times
to remove air from lines
Obstruction in hydraulic lines
Replace obstructed or damaged line
Chute will not rotate/angle Hydraulic valve on skid steer not engaged
See skid steer operator's manual for auxiliary
hydraulic operation procedure
Worn, damaged, insufficient or inadequate pump
Repair or replace hydraulic pump
Insufficient oil in system
Service the skid steer hydraulic reservoir, see
skid steer operator's manual
Hose ends not completely engaged
Hose ends not completely engaged
Air in hydraulic lines
Cycle skid steer auxiliary system several times
to remove air from lines
Obstruction in hydraulic lines
Replace obstructed or damaged line
Electrical failure
See skid steer operator's manual
Oil leaks
Worn or damaged seal
Replace leaking seal
Loose or damaged hoses
Replace damaged hoses and secure loose
hoses
Loose or damaged connections
Replace damaged hose connections and
tighten loose fittings
TROUBLESHOOTING
