FFC 11048 Скачать руководство пользователя страница 5

Страница: 5 / 49

DANGER!

THIS SIGNAL WORD IS USED WHERE SERIOUS INJURY OR DEATH WILL RESULT IF

THE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY.

WARNING! THIS SIGNAL WORD IS USED WHERE SERIOUS INJURY OR DEATH COULD RESULT

IF THE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY.

CAUTION! THIS SIGNAL WORD IS USED WHERE MINOR INJURY COULD RESULT IF THE

INSTRUCTIONS ARE NOT FOLLOWED PROPERLY.

NOTICE!

NOTICE INDICATES A PROPERTY DAMAGE MESSAGE.

THIS SYMBOL BY ITSELF OR USED WITH A WARNING WORD THROUGHOUT THIS

MANUAL IS USED TO CALL YOUR ATTENTION TO INSTRUCTIONS INVOLVING YOUR

PERSONAL SAFETY OR THE SAFETY OF OTHERS. FAILURE TO FOLLOW THESE

INSTRUCTIONS CAN RESULT IN INJURY OR DEATH.

SAFETY STATEMENTS

GENERAL SAFETY PRECAUTIONS

WARNING! READ MANUAL PRIOR TO INSTALL

Improper installation, operation, or maintenance of this equipment could result in serious

injury or death. Operators and maintenance personnel should read this manual as well as

all manuals related to this equipment and the prime mover thoroughly before beginning

installation, operation, or maintenance.

FOLLOW ALL SAFETY INSTRUCTIONS IN THIS

MANUAL AND THE PRIME MOVERS MANUAL.

WARNING! READ AND UNDERSTAND ALL SAFETY STATEMENTS

Read all safety decals and safety statements in all manuals prior to operating or working

on this equipment. Know and obey all OSHA regulations, local laws and other professional

guidelines for your operation. Know and follow good work practices when assembling,

maintaining, repairing, mounting, removing or operating this equipment.

KNOW YOUR EQUIPMENT

Know your equipment’s capabilities, dimensions and operations before operating. Visually

inspect your equipment before you start, and never operate equipment that is not in proper

working order with all safety devices intact. Check all hardware to assure it is tight. Make

certain that all locking pins, latches, and connection devices are properly installed and

secured. Remove and replace any damaged, fatigued or excessively worn parts. Make

certain all safety decals are in place and are legible. Keep decals clean, and replace them if

they become worn and hard to read.

Содержание 11048


















































Результаты поиска

Содержание 11048

Отзывы:

Похожие инструкции для 11048

Бренды по названию

Популярные бренды

FFC 11048, Руководство оператора и каталог запасных частей

Результаты поиска

Содержание 11048

Отзывы:

Похожие инструкции для 11048

Бренды по названию

Популярные бренды