Festo SFC-DC series, Руководство пользователя

Страница: 82 / 202

4. Control panel (only type SFC−DC−...−H2−...)
4−20
Festo P.BE−SFC−DC−IO−EN en 0801a
Carry out position sets
1. Use the arrow buttons to select [Positioning] in the main
menu and press the <Enter> button.
2. Select the menu command:
Positioning run Position set" [Move posit set]
or
Positioning run Position set table" [Demo posit. tab]
[Positioning] Manual Please note
[Move posit. set] Positioning run for testing a certain
position set in the position set table. Parametrizing and referencing must
be completed.
[Demo posit. tab] Positioning run (continuous loop) for
testing all position sets (1...31) in the
position set table. Parametrizing and referencing must
be completed.
There must be at least two position
sets in the memory.
In the positioning run [Demo posit tab] all position sets 1...31
in the position set table will be processed one after the other.
If the position set table contains a position set with speed
v=0, this position set and all the following sets will not be
processed; the positioning run will be continued with position
set1.
}
Positioning
Homing
}
Move posit. set
Demo posit. tab