Festo SFC-DC series, Руководство пользователя

Страница: 60 / 202

3. Installation
3−16
Festo P.BE−SFC−DC−IO−EN en 0801a
3.7 Input for external reference switch
If you are not using a reference switch:
·
Seal the connection with the protective cap supplied
(type ISK−M8).
Use e.g. the following proximity switches from Festo:
electric proximity switch SME−10F−... /SMT−10F−...
(can be installed in sensor grooves of the drive profile).
If necessary, use an extension cable type KM8−M8−....
Connecting the reference switch:
·
Use the correct switch type normally−open" for the
reference switch in the PNP variant.
·
For connecting the reference switch use a cable with
rotating thread sleeve on the end of the cable, e.g. type
SME−10F.../SMT−10F... or extension cable type KM8−M8−....
·
When selecting the sensor, note that the accuracy of the
switchover point of the sensor can affect the accuracy of
the reference point.
·
During installation, observe the position of the sensor
relative to the index pulse; shift the sensor if necessary
(see warning INDEX PULSE WARNING", section 6.3).