Festo SFC-DC series, Руководство пользователя

Страница: 74 / 202

4. Control panel (only type SFC−DC−...−H2−...)
4−12
Festo P.BE−SFC−DC−IO−EN en 0801a
4.2.4 Settings" menu
For parametrizing the axis system and programming the
position sets:
1. Use the arrow buttons to select [Settings] in the main
menu and press the <Enter> button.
2. Select:
the axis type [Axis type]
the axis parameters [Axis parameter]
the referencing parameters [Homing paramet.]
the position set table [Position set]
the password setting [Password edit].
[Axis type] Design of axis driven by the SFC−DC.
[Axis type] Parameters
[SLTE...] Electric mini−slide from Festo, type SLTE−...
Select the type used:
SLTE10_50_G04:
type SLTE−10−50−LS5,0−DC−VCSC−G04
SLTE10_80_G04: type SLTE−10−80−LS5,0−DC−VCSC−G04
SLTE16_50_G04: type SLTE−16−50−LS7,5−DC−VCSC−G04
SLTE16_80_G04: type SLTE−16−80−LS7,5−DC−VCSC−G04
SLTE16_100_G04: type SLTE−16−100−LS7,5−DC−VCSC−G04
SLTE16_150_G04: type SLTE−16−150−LS7,5−DC−VCSC−G04
The selection defines the following settings:
the feed constant,e.g.:
SLTE−10−50−LS5,0−DC−VCSC−G04: 5 mm / spindle rotation,
Encoder resolution 512 incr./revolution,
Gear 57/13
SLTE−16−150−LS7,5−DC−VCSC−G04:7.5 mm / spindle rotation,
Encoder resolution 1000 incr./revolution,
Gear 57/13
the measurement system (metric)
Support for further drives is in preparation
}
Settings
}
Axis type
Axis parameter
Homing paramet.
Position set
Password edit