Festo HMP-x-B Series, Руководство по эксплуатации

Страница: 51 / 56

HMP−...−B−...
Festo HMP−...−B−... 0408NH English
51
Fault Remedy Possible cause
Linear module
does not
achieve the Missing air volume Enlarge connection cross−section
Switch volume upstream
achieve the
desired speed
Heavy friction or counterforce Select larger linear module
Fig.45
12 Technical data
Type HMP−...
16−...−B 20−...−B 25−...−B 32−...−B
Design Double−acting pneumatic cylinder
Mounting position As desired
Medium Filtered, lubricated or non−lubricated compressed air
(filter fineness min. 40 m)
at speeds up to max. 1 m/s (lubricated compressed
air permitted)
at speeds over 1 m/s (always use lubricated com
pressed air)
Operating pressure range 4 ... max. 8 bar
Connector thread M5 G1/8 G1/8 G1/4
Permitted temperature range 0 °C ... max. 60 °C
Theoretical stroke force at
6bar
running forwards
running backwards
121 N
104 N 188 N
158 N 295 N
247 N 483 N
415 N
Leakage 2 Nl/h (when new, measured at 6 bar)
Repetition accuracy
*)
< 0.01 mm
End position cushioning Hydraulic cushioning
Cushioning length 14 mm 20 mm 20 mm 26 mm