A
Technical data
Festo – EXCM-10/-30-...-E-EN – 1612b – English
73
A
Technical data
A.1
General data
Characteristic
Specification/value
Protection class of entire system to EN 60529
IP20 (with full pin allocation)
Degree of contamination in accordance with
EN 50178
2
Note on materials
RoHS-compliant
Corrosion resistance class (CRC)
1
Ambient temperature in operation
[°C]
+10 … +45
Ambient temperature in storage/conveying
[°C]
–10 … +60
Relative air humidity (at 25 °C)
[%]
0 … 90 (non-condensing)
Weight
[g]
660
Electromagnetic compatibility (EMC)
CE marking (see declaration of conformity)
(
è
www.festo.com)
Vibration
Checked in accordance with DIN EN 60068 part 2-6
With wall mounting: severity level 2
With H-rail mounting: severity level 1
Shock
Checked in accordance with DIN EN 60068 part 2-27
With wall mounting: severity level 2
With H-rail mounting: severity level 1
Continuous shock test
Checked in accordance with DIN EN 60068 part 2-29
With wall and H-rail mounting:
Severity level 1
1)
The device is intended for use in an industrial environment. Measures for interference suppression may need to be taken in the
residential or laboratory areas.
A.2
Electrical data
Characteristic
Specification/value
Power supply
[V]
24 ±15%
Nominal current load voltage (EXCM-10)
[A]
2.8
Nominal current load voltage (EXCM-30)
[A]
6.0
Peak current (load voltage)
[A]
8.0
Nominal current, logic supply
(without power supply to the outputs)
[A]
0.3
Nominal current of the logic supply
(per output of the I/O interface)
[A]
0.1
Total current consumption
Dependent on system configuration
Protection against electric shock
(Protection against direct and indirect contact in
accordance with IEC/DIN EN 60204-1)
By means of PELV power circuit
(Protected Extra Low Voltage)
Encoder resolution
Starting at 500 pulses/revolution, through
the internal electronic multiplication result in
2000 pulses/revolution
(maximum encoder resolution 19μm)
Max. speed and torque of the motors
è
Operating instructions of the drives
