7
Diagnostics
Festo – EXCM-10/-30-...-E-EN – 1612b – English
71
Hex
Type of error/diagnostic memory
Error name
Dec
3E
62
Diagnostic memory
(Diagnostic memory)
Can be parameterised as:
F
/-/-
Diagnostic memory: always
An error has occurred when writing or reading from the diagnostic memory.
Acknowledge the error. If the error is still present, it means a memory module is probably defect
ive or an incorrect entry has been stored.
Erase the diagnostic memory. If the error still occurs, the controller must be replaced.
–
Acknowledgement option: Error can only be acknowledged after the cause is eliminated.
Parameterisable error response(s):
G
3F
63
Record invalid
(Record invalid)
Can be parameterised as:
F
/-/-
Diagnostic memory: optional
The started record is invalid. The record data are not plausible or the record type is invalid.
Check the parameters of the record.
–
Acknowledgement option: Error can only be acknowledged after the cause is eliminated.
Parameterisable error response(s): B, C, D,
E
, F, G
41
65
System reset
(System reset)
Can be parameterised as:
F
/-/-
Diagnostic memory: always
An internal firmware error has been detected.
Contact Festo Service.
–
Acknowledgement option: Error can only be acknowledged after the cause is eliminated.
Parameterisable error response(s):
A
Tab. 7.4
Table of error messages
