17 / 46
Festo 7DHTGb_en
• Remove the guide rail of the guide segments from the clamping ring.
• Remove the guide segments from the housing.
Note
The number of guide segments depends on the size of the rotary indexing
table (see table).
Type
Number of guide segments
DHTG-65-
…
-A
1
DHTG-90-
…
-A
2
DHTG-140-
…
-A
3
DHTG-220-
…
-A
3
• Lift the plate up and out of the housing.
Note (DHTG-220 only)
To facilitate removal of the plate, you can screw two M8 screws (not included
in the scope of delivery) into the plate thread and use them to hold the plate
and lift it up and out of the housing.
4.1.2
Dismantling the plate (DHTG-65 and DHTG-90)
Note
To release the pretension of the screw, tap the screw head using a pin punch
and a hammer.
• Loosen the countersunk screws in the index plate and steadily unscrew
them.
• To loosen the index plate, steadily screw the countersunk screws into the
threaded holes of the index plate and lift it without twisting it.
