39 / 46
Festo 7DHTGb_en
• Place the index plate on the centring bolts in the plate with the countersinks
for the countersunk screws facing upwards.
• Attach the index plate using the countersunk screws on the plate and
tighten them using the appropriate torque (see table).
Type
Torque
DHTG-65-
…
-A
2 Nm
DHTG-90-
…
-A
4 Nm
4.2.5
Assembling the plate (DHTG-140)
• Push the rail of the guide segments onto the plate.
• Place the compression springs and the sleeves in the guides in the plate.
• Place the ring gear on the sleeves with the countersinks facing downwards.
