Festo CPX-FB38, Электронное руководство

Страница: 88 / 120

2. Commissioning
2−52
Festo P.BE−CPX−FB38−EN en 0804NH
2.8 Checklist for starting up the CPX terminal
Providing the safety concept of your machine/system per
mits, start up the CPX terminal with both operating voltages
but without compressed air. In this way, you can then test the
CPX terminal without triggering unintended reactions.
Please note
Pay attention to start−up information!
Please observe the general start−up instructions in the CPX
system manual (P.BE−CPX−SYS−...) and in the manual of
your controller.
Caution
Undesired activation of actuators!
An incorrect status of the valves and outputs can lead to
dangerous situations!
The CPX terminal with bus node for EtherCAT also starts
with
incomplete configuration.
Check the configuration and address assignment of the
I/Os on the CPX terminal.
In order to do this, you can, if necessary, force the I/Os
(see CPX system manual).