Festo CPX-FB38, Электронное руководство

Страница: 103 / 120

3. Diagnosis
3−13
Festo P.BE−CPX−FB38−EN en 0804NH
3.3 Diagnostics via status bits
The CPX terminal provides 8 status bits if youactivatethis
function using DIL switches (see section 1.2.2).
The status bits are used for displaying common diagnostics
messages (global error messages). Status bits are configured
like inputs. If the status bits function is activated, it occupies
the first 16 inputs in the address range (8 inputs or 8 bits
remain unused; see Tab.1/2 or Tab.2/1).
Please note
Note the instructions on addressing and configuration in
the sections 2.3 and 2.4.
The following table provides an overview of the available
diagnostic information.
Bit Diagnostic information with
1−signal Manual
0 Fault at valve or pneumatic module Module type in which
a fault has occurred
1 Fault on output module
a fault has occurred.
2 Fault on input module
3 Fault on analogue module or
technology module
4 Undervoltage Type of fault
5 Short circuit/overload
6 Wire break
7 Other faults
Tab.3/10: Overview Status bits of the CPX bus node
(optional)