Festo CPX-FB38, Электронное руководство

Страница: 102 / 120

3. Diagnosis
3−12
Festo P.BE−CPX−FB38−EN en 0804NH
M (modify) parameterising modified or forcing active
LED (yellow) Sequence Status Meaning/error handling
LED is off
ON
OFF
System start with default
parameterisation (factory
setting) and current CPX
expansion has been set;
external parameterisation
possible (presetting) None
LED lights up
ON
OFF
System start with saved
parameterisation and
saved CPX expansion has
been set;
parameters and CPX
expansion are retained;
external parameterisation
is blocked
1)
Be careful
when replacing CPX ter
minals with saved parameterisation:
Parameterisation is not carried out
automatically for these CPX terminals
by the higher−order controller when
the terminal is replaced. In these
cases, check which settings are
required before the replacement and
make these settings if necessary.
LED flashes
ON
OFF
Force is active
1)
The Force function has been activated
(Force mode; Function No. 4402, see
CPX System Manual P.BE−CPX−SYS−...).
1)
The display of the Force function (LED flashes) has priority over the display of the setting for the
system start (LED lights).
Tab.3/9: Messages of the LED M