Festo CPX-AP-I-PN-M12, Инструкции и эксплуатация

Страница: 12 / 24

ID Parameter Instance-
s Data
type Access
1)
Arraysize
– Bit 3: degree of severity error (1)
– Bit 4: reserved
– Bit 5: reserved
– Bit 6: module present (1), module lost
(0)
– Bit 7: reserved
Bit 6 is not valid for index 0
1) ro = read only; rw = read write
Tab. 10 Parameter
10 Diagnostics and fault clearance
10.1 Diagnostics options
Diagnostics via LED displays
The system and network status and errors are displayed directly on the module via LED indicators
è
10.3 LED displays.
Diagnostics via web server
Read access to diagnostic messages via the integrated webserver è 10.4 Diagnostics via web server.
Diagnostics via PROFINET IO
Diagnostics as part of PROFINET IO functions è 10.5 Diagnostics via PROFINET IO via control soft-
ware through the network.
10.2 Diagnostic messages
Only the diagnostic messages of the interface are listed in the following table.
Module-specific diagnostic messages
è
Instructions for the respective module
ID hex (dec) Message Description
Overvoltage in the logic supply PS 24 V DC detected.
Remedy – Check logic supply PS.
02
|
01
|
0017
(33619991)
Overvoltage in logic
supply PS 24 V DC
Diagnost-
ic status Error
Undervoltage in the load supply PL 24 V DC detected.
Remedy – Check load supply PL.
02
|
01
|
0105
(33620229)
Undervoltage in load
supply PL 24 V DC
Diagnost-
ic status Error
Diagnostics and fault clearance
12 Festo — CPX-AP-I-PN-M12 — 2019-06