Festo CPX-AP-I-PN-M12, Инструкции и эксплуатация

Страница: 10 / 24

8 Commissioning
NOTICE!
Malfunction due to switching on the higher-order controller and automation system CPX-AP in the
incorrect order.
• Switch on the higher-order controller and automation system CPX-AP according to the preset
order of the network used.
1. Using the appropriate software, set up an automation project for the higher-order controller.
2. Import the device description file into the software
è www.festo.com/sp.
3. Configure the automation system CPX-AP in the software:
– System structure
– Network addressing
– Address assignment of modules
è
Instruction manual for automation system CPX-AP
4. Transfer the automation project to the higher-order controller.
Behaviour of the display components of the module after error-free commissioning
[MD] [SD] [PL] [MT]
Illuminated green Illuminated green Illuminated green Off
Tab. 8 Behaviour of the display components after error-free commissioning
[XF1], [XF2] [NF] [PE]
Illuminated green
1)
Off Off
1) only when cable is connected to [XF1] or [XF2]
Tab. 9 Behaviour of the display components after error-free commissioning
Information on troubleshooting in the event of incorrect behaviour:
è Instruction manual for automation system CPX-AP
è 10 Diagnostics and fault clearance
9 Parameterisation
Various parameters are available for reading out information about the modules in an automation sys-
tem CPX-AP and adapting the modules to the application situation.
Write access to the parameters is typically performed by the higher-level controller using the device
descriptions specific to the host system.
Commissioning
10 Festo — CPX-AP-I-PN-M12 — 2019-06