Festo CPX-AP-I-PN-M12, Инструкции и эксплуатация

Страница: 11 / 24

ID Parameter Instance-
s Data
type Access
1)
Arraysize
70 Part number 1 UINT32 ro
–
246 Fieldbus serial number 1 UINT32 ro
–
791 Product key 1 CHAR ro 12
960 Firmware version 1 CHAR ro 30
12004 Active IP address 1 UINT32 ro
–
12005 Active subnet mask 1 UINT32 ro
–
12006 Active gateway address 1 UINT32 ro
–
12007 MAC address 1 UINT8 ro 6
20000 Module code 1 UINT32 ro
–
20022 Configuration of voltage monitoring load
supply PL
–
0: load voltage monitoring inactive
– 1: load voltage monitoring active, with
suppression of diagnostics at switch-
off (factory setting)
– 2: load voltage monitoring active
1 UINT8 rw
–
20085 Measured value temperature AP-ASIC [°C] 1 INT16 ro
–
20087 Current measured value of logic supply PS
[mV] 1 UINT16 ro
–
20088 Current measured value of load supply PL
[mV] 1 UINT16 ro
–
20093 Hardware version 1 UINT8 ro
–
20196 Diagnostic status
–
Index 0: diagnostic status of the entire
automation system CPX-AP
– Index 1: diagnostic status of module 1
(address 1)
– Index 2: diagnostic status of module 2
(address 2)
– ...
Each entry is of the data type UINT8 with
the following meaning:
–
Bit 0: degree of severity information (1)
– Bit 1: degree of severity maintenance
(1)
– Bit 2: degree of severity warning (1)
1 UINT8 ro Number
of mod-
ules + 1
Parameterisation
11 Festo — CPX-AP-I-PN-M12 — 2019-06