Festo CPX-AP-I-PN-M12, Инструкции и эксплуатация

Страница: 18 / 24

Connection status [XF1], [XF2]
LED (green) Meaning Remedy
Off
No network connection. Check network connection.
Flashes green
Module positioning if both LEDs (XF1
and XF2) flash synchronously, e. g. for
troubleshooting purposes or during con-
figuration.
–
Illuminated
green
Network connection OK.
–
Tab. 18 LED connection status [XF1], [XF2]
10.4 Diagnostics via web server
A webserver is available to display the diagnostic messages.
The web server can be accessed by entering the IP address in the address bar of a web browser.
10.5 Diagnostics via PROFINET IO
The automation system CPX-AP supports diagnostic options via PROFINET IO in accordance with
IEC 61158, e. g. module-related and channel-related status information as well as error detection in
the online mode of the control software and in the user program of the high-order controller.
Diagnostic messages from the automation system CPX-AP that cannot be seen on the PROFINET stand-
ard diagnostics are shown as manufacturer-specific PROFINET channel diagnostics.
For PROFINET, only the lower 16 bits of the diagnostic ID (error number) are shown.
The display rule is as follows:
–
Error number 1 … 32767:
ChannelErrType = 2001 with ExtChannelErrType = error number
– Error number 32768 … 65535:
ChannelErrType = 2002 with ExtChannelErrType = error number – 32768
The error number 0 is reserved.
Information on grouping and displaying the diagnostic messages
è
Instructions on the automation system CPX-AP.
Diagnostics and fault clearance
18 Festo — CPX-AP-I-PN-M12 — 2019-06