Festo CPX-AP-I-EP-M12, Инструкции и эксплуатация

Страница: 35 / 48

9.2.2 Input register
Register Length Access
1)
Name Description/value
0 4096 ro Inputs Inputs
1) ro = read only; rw = read write
Tab. 30 Input register
9.2.3 Discrete input
Register Length Access
1)
Name Description/value
0 32768 ro Inputs Inputs
1) ro = read only; rw = read write
Tab. 31 Discrete input
9.2.4 Coils
Register Length Access
1)
Name Description/value
0 32768 rw Outputs Outputs
1) ro = read only; rw = read write
Tab. 32 Coils
10 Diagnostics and fault clearance
10.1 Diagnostics options
Diagnostics via LED displays
The system and network status and errors are displayed directly on the module via LED indicators
è 10.3 LED displays.
Diagnostics via EtherNet/IP, Modbus TCP
Diagnostics as part of EtherNet/IP, Modbus TCP functions via control software through the network.
10.2 Diagnostic messages
Only the diagnostic messages of the interface are listed in the following table.
Module-specific diagnostic messages
è Instructions for the respective module
ID hex (dec) Message Description
Overvoltage in the logic supply PS 24 V DC detected.
Remedy – Check logic supply PS.
02
|
01
|
0017
(33619991)
Overvoltage in logic
supply PS 24 V DC
Diagnost-
ic status Error
Diagnostics and fault clearance
35 Festo — CPX-AP-I-EP-M12 — 2019-08