Festo CPV10, Руководство пользователя

Страница: 25 / 164

1. Sysytem summary
1−9
Festo P.BE−CPV−EN en 0503g
Flow control valve or one−way flow control valve
extension
With the following valve extensions you can adapt the CPV
valve terminal to the requirements of your machine or sys
tem.
For restricting the supply or exhaust air of the valve sub−
bases use valve extension:
CPV−..−BS−2xGRZZ−... for restricting the supply air
CPV−..−BS−2xGRZZ−... for restricting the exhaust air.
For restricting the reject pulse of the vacuum generator plate
with Ident code E use valve extension:
CPV−..−BS−GRZ−V−...
The valve extensions are flange−fitted directly onto the valve
sub−bases. It is not intended that the above−mentioned valve
extensions should be combined.
Further information on the valve extensions can be found
under Fitting the valve extensions" in chapter 2 and under
General instructions" in chapter 4.
Vacuum generator plates
CPV valve terminals can be fitted with vacuum generator
plates for generating vacuum. Work items with a smooth and
tight surface can then be sucked in.
Two types of vacuum generators are available:
Plate with switchable vacuum generator.
Plate with switchable vacuum generator and additional
2/2−way valve for generating the reject pulse.
Further information on the vacuum generator plates can be
found under Vacuum generator plates" in chapter 3.3.2.