Festo CPV10, Руководство пользователя

Страница: 105 / 164

5. Maintenance and conversion
5−5
Festo P.BE−CPV−EN en 0503g
Some components on the CPV valve terminal may only be
operated in combination with other components, see the
following compatibility list.
Components, Cover plate
Ident. code
1)
AS−
Interface CP IC
2)
MP DI
Vacuum gener
ator plates: A, E No limits
Please note the recommendations in chapter 3
Valve sub−bases:
C, D, H, I, J, M, N No limits
Valve sub−base:
F (only CPV10) No limits No limits Only with
connector
socket with
current
reduction
KMYZ−7−... Without HSA
3)
only every
2nd. valve
sub−base
With HSA:
no limits
No limits
Valve sub−base: G CPV10/14: If the pneumatic multipin is used with assembly step, the outer valve
sub−bases cannot be fitted with the necessary 5/3G valve extension.
CPV18: No limits
Blanking plate: L No limits
Relay plate: R Not
permitted
with CPV14 No limits Without HSA
3)
not
permitted
With HSA:
no limits
No limits
Separator plates:
S, T Combination depends on end plate combination
4)
1) List of Ident. codes see chapter 1 Identification code."
2) CPV valve terminals for Siemens ET 200 X: Valve sub−base Ident. code F and relay plate not
permitted.
3) MP connection with HSA (holding current reduction), CPV10: s from 10/2000, CPV14 as from
11/2000.
4) Combination list of end plates see section End plate combinations."
Tab.5/2: Compatibility list of valve location components