Festo CPV10/14-ASI-8E6A 2018-11b English
12
3.6 Connection example – valve terminal type 10
1
AS-Interface master
2
Combination power
supply from Festo
(electronically safe
guarded/short-
circuit proof )
3
Load voltage can
be switched off
0
1
2
3
4
5
6
7
1
2
3
3.7 Converting the valve terminal
The CPV valve terminal can be fitted with double-solenoid
and/or single-solenoid valves. During conversion, the new
valve terminal configuration must be set on the DIP
switches on the bottom of the electric sub-base.
1
DIP switch 1:
Valve locations
1 to 4 (slave 1)
2
DIP switch 2:
Valve locations
5 to 8 (slave 2)
ON
123
4
ON
12
34
1
2
Instructions on removign the electric sub-base can be
found in the Pneumatics Manual. The permitted valve com
binations as well as the relevant DIP switch settings can be
found in the table in section 3.3.
