Operation
66
© Festo Didactic
8065842 en
8
Operation
An application module has no control elements. Operation of the application module is only possible when it
is mounted on a basic module of the CP-Lab or CP-Factory system.
The operation of the application module can be realized by every customer according to his wishes, the
supplied programs are only an operating suggestion with which the application module is on CP-Lab
or CP-Factory System can be operated. Own operating concepts or external controls are also possible.
If the application module is mounted on a CP Lab or a CP Factory basic module, the general operation for
this is described in the manuals of the CP Lab or CP Factory system. All application-specific information is
described in this manual for the application module.
8.1
Setting the application module labeling at HMI
1.
If the application module has not yet started, click on the Setup button under Operating mode on the
home screen. The application module moves into its basic position
Содержание CP Factory
