Festo CP Factory, Оригинальная инструкция по эксплуатации

Страница: 11 / 90

Fundamental safety instructions
© Festo Didactic 8065842 en
11
4 Basic safety instructions
4.1 General information
CAUTION
•
Trainees must be supervised by an instructor at all times when working with the
components and systems.
•
Observe the specifications included in the technical data for the individual
components, and in particular all the safety instructions!
•
Wear your personal protective equipment (safety goggles, safety shoes).
•
Never leave objects lying on the top of protective enclosures. Vibrations could
cause such objects to fall off.
4.2 Mechanical components
WARNING
•
Switch off the power supply!
– Switch off both the operating power and the control power before commencing
work on the circuit.
– Never reach into the setup unless it is at a complete standstill.
– Be aware of potential overtravel times for the actuators.
•
Risk of injury during troubleshooting!
– Use a tool such as a screwdriver for actuating sensors.
CAUTION
•
Risk of burns due to hot surfaces
– Devices can reach high temperatures during operation, as a result of which they
can cause burns if touched.
•
Measures to take when maintenance is required.
– Allow the device to cool off before commencing work.
– Use suitable personal protective clothing, e.g. safety safety gloves.