Festo 548076 Скачать руководство пользователя | Manualshive

Страница: 7 / 92

background image

7 / 92

Festo 7DHTGd_en

1.3

Text designations used in these repair instructions

• Activities that can be carried out in any order.

.

1

Activities which should be carried out in the specified order.

– General list



Result of an activity / references to further information

Underlined, blue text

indicates a cross-reference or hyperlink that you can click on in the PDF.

1.4

General safety instructions

Warning

The rotary indexing table must only be repaired by authorised and trained persons in accordance with the specifica

-

tions in the technical documentation and using genuine spare parts.
Installation and repair by unauthorised and untrained persons, repairs using non-original spare parts or without the
technical documentation required for installation and/or repair are dangerous and therefore not permitted.

Repairs must only be carried out in conjunction with these repair instructions and the respective device-specific oper

-

ating instructions.

Caution

Unintended switching on can trigger unexpected movements and cause bruises.
•

Ensure that the unit is protected against restarting before any modification or maintenance work or inspections

are carried out. Loosened parts can make unexpected movements or fall off.

• Secure parts against accidental movements or move them into a safe end position.

Caution

Lifting large loads can lead to permanent injury.
•

Depending on their size and weight, the products must be lifted by several persons or using suitable lifting gear.

Note

Carrying out repair work without the respective necessary technical documentation is dangerous, and therefore not
permissible. Repairs must only be carried out in conjunction with these repair instructions and the respective operat-
ing instructions for the device, as well as the documents listed in

Chapter 1.1 on page 6

.

In the event of damage caused by unauthorised manipulation, improper use or use of non-original spare parts, all
warranty and liability claims against the manufacturer expire.

Instead of carrying out the repair yourself, your local Festo sales office offers the option of having the repair carried

out by Festo.

Note

• Observe the given tightening torques. If no special information is given the tightening torques given in the relevant

standard apply to the screws, bolts and nuts used.

• Note the strength class of the screws, bolts and nuts!

Components and equipment replaced during repair must be disposed of in accordance with the relevant local environ-
mental protection regulations.

«
...
5
6
7
8
9
...
»

Содержание 548076





























































































Отзывы:

Нет отзывов

Похожие инструкции для 548076

Бренд: ABB Страницы: 14

LOUDEN 200 Series

Бренд: ACCO Brands Страницы: 144

Бренд: B&K Страницы: 16

Бренд: B&G Страницы: 2

Бренд: EAW Страницы: 2

Бренд: abc Страницы: 28

Бренд: Hach Страницы: 66

Бренд: Hach Страницы: 14

Бренд: Hach Страницы: 144

QuikChem 8500 2 Series

Бренд: Hach Страницы: 80

Бренд: Hach Страницы: 178

Бренд: Hach Страницы: 32

Бренд: hager Страницы: 4

Бренд: Taylor-Wharton Страницы: 25

Бренд: i-CAT Страницы: 96

Бренд: TDR Страницы: 8

Бренд: GE Страницы: 18

Бренд: Panasonic Страницы: 23

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды