Festo 174335, Электронное руководство

Страница: 29 / 184

2. Fitting
2-3
Festo P.BE-VIFB13-03-EN en 0003c
2.1 Fitting the modules and components
The valve terminal is supplied from the factory ready fitted. If
you wish to supplement or replace individual modules or
components, please follow the instructions in the following
manuals:
– “Supplementary description of the I/O modules” for fit-
ting the electric I/O modules
– “Pneumatics manual” for fitting the pneumatic modules
– Fitting instructions supplied with the product in the case
of modules and components ordered at a later date.
Please note
Handle all modules and components of the valve terminal
with the utmost care. Pay particular attention to the follow-
ing:
– Make sure that screws are not distorted and not sub-
jected to mechanical stress. Make sure that screws are
correctly aligned (otherwise their threads may be dam-
aged).
– Make sure that the specified torques are not exceeded.
– Avoid misalignment between the modules (IP 65).
– Make sure that connecting surfaces are clean (avoid
leakage and contact faults).
– The contacts of type 03 valve solenoid coils must not be
bent (they are not resistant to bending, i.e. they will
break off if bent backwards).
– Electrostatically sensitive components
Do not touch the contact surfaces of the plug connectors
on the sides of the modules and components.