MACHINES AND
ACCESSORIES
Page 20 of 29
9 MACHINE OPERATION
9.1 Adjusting table height
Loss of stability / Fall
Move the table vertically only when the machine is free of load (hydraulic circuit not
under pressure).
Ensure no one has limbs or body parts under the table to avoid crushing.
Protective gloves
Always wear suitable protective gloves while moving the table vertically.
Place the table and pressing plate at the required height depending on the size of the
workpiece as follows:
1. Unload the table, removing all wedges and pressing plates.
2. Use the manual winch to slightly lift the pallet and therefore remove weight from the
four support pins.
Crushing
Do not attempt to operate the winch with your hands near the teeth of the winch itself.
Always use the handle.
3. Remove the cotter pin from the locking pins
and pull them out one by one from their
housing being careful not to destabilize the
pallet carrier.
Figure 13 - Winch and pins.
fervi.com
