4
GENERAL FEATURES
Declaration of conformity
Unit dataplate
The figure shows the fields reported on the unit dataplate :
The company hereby declares that the machine in question complies with the matters prescribed by the following Directives:
• Machine
Directive
2006/42/CE
•
Directive governing pressurized vessels (PED)
97/23/CE
•
Electromagnetic compatibility Directive
(EMC)
2004/108/CE
•
Low voltage Directive (LVD)
2006/95/CE
Codice
Code
B1
Rev
Ferroli Spa
Via Ritonda 78/A
(VR) Italy
A
- Trademark
B
- Model
B1
- Code
C
- Serial number
D
- Capacity in cooling
E
- Capacity in heating (heat pump)
F
- Power input in cooling
G
- Power input in heating (heat pump)
H
- Reference standard
I
- Power supply
L
- Maximum absorbed current
M
- Refrigerant type and charge weight
N
- Weight empty unit
O
- Sound pressure level at 1 metre
P
- IP protection level
Q
- Maximum pressure - high pressure side
R
- Maximum pressure - low pressure side
S
- PED certification body
General specifications
• This manual and the wiring diagram supplied with the unit must be kept in a dry place and ready to hand for future consultation
when required.
• This manual has been compiled to ensure that the unit is installed in the correct way and to supply comprehensive information
about how to correctly use and service the appliance.
Before proceeding with the installation phase, please carefully read all the
information in this manual, which describes the procedures required to correctly install and use the unit .
• Strictly comply with the instructions in this manual and conform to the current safety standards.
• The appliance must be installed in accordance with the laws in force in the country in which the unit is installed.
• Unauthorized tampering with the electrical and mechanical equipment will
VOID THE WARRANTY .
• Check the electrical specifications on the identification plate before making the electrical connections. Read the instructions in the
specific section where the electrical connections are described.
• If the unit must be repaired for any reason, this must only be done by a specialized assistance center recognized by the manufacturer
and using geuine spare parts.
• The manufacturer also declines all liability for any damage to persons or property deriving from failure of the information in this
manual to correspond to the actual machine in your possession.
• Proper uses: this series of chillers is designed to produce cold or hot water for use in hydronic systems for conditioning/
heating purposes . The units are not suitable for the production of domestic hot water .
Any use differing from this proper use or beyond the operating limits indicated in this manual is forbidden unless
previously agreed with the manufacturer .
• The prevention of the risk of fire at the installation site is the responsiblity of the end user .
CONTAINS FLUORINATED GREENHOUSE GASES COVERED BY THE KYOTO PROTOCOL:
- R410A (GLOBAL WARMING POTENTIAL GWP = 2088)