BOILER REPLACEMENT: MODENA 80/102 TO MODENA C E
Manual Handling
When lifting take suitable safety precautions: keep your back straight, bend knees, do not turn your
body, avoid bending forward or sideways and keep the load as close as possible to your body. Ideally
seek assistance in lifting the boiler.
If possible, use a trolley or other suitable means to carry the boiler to site. Use appropriate
protective clothing and gloves to avoid injury from any sharp edges etc.
------------------------------------------------------------------------------------------------------------------------------------
REMOVE THE EXISTING MODENA 80/102
1.
Removal of the outer case:
Hinge down the controls cover
panel and undo the four case
securing screws on the
underside of the boiler. Ease
the lower edge of the case
forward to clear the controls
panel and lift the case upwards
off the retaining lugs (Fig.1)
Case Securing Screws
Fig.1
2.
Safely isolate the electricity, gas and water supplies
to the appliance. Completely drain the boiler and
central heating system and disconnect all existing pipe-
work connections from the underside of the boiler
(Fig.2)
3.
Disconnect the electrical supply to the boiler at the 3
pin plug or fused spur and any external controls
connections at the boiler terminal block 3 & 4 – access
via the panel on the underside of the boiler (Fig. 3)
4.
Disconnect and remove the flue from the existing
boiler by undoing the four screws securing the
appliance bend to the top of the boiler (Fig.4)
Fig.3
Fig.4
Fig.2
