background image

Not for 

Reproduction

2

ferrismowers.com

Table of Contents:

Products Covered by This Manual......................................3
Identification Tag Location.................................................. 3
CE Identification Tag Markings........................................... 3
Operator Safety..................................................................... 4

Operating Safely...............................................................4
Slope Identification Guide................................................ 6
Safety Rules and Information...........................................6
Safety Decals................................................................. 10
Safety Icons....................................................................11
Safety Icons for Optional Jack Kit Accessory.................12
Safety Alert Symbol and Signal Words.......................... 13
Safety Interlock System..................................................13

Features and Controls........................................................13

Control Functions and Locations....................................13
Zero-Turn Rider Controls............................................... 13
Instrument Control Panel................................................15

Operation............................................................................. 16

Before First Time Operation...........................................16
Checks Before Starting.................................................. 16
Starting the Engine - Carbureted Models.......................16
Stopping the Rider......................................................... 17
Zero-Turn Driving Practice............................................. 17
Mowing............................................................................19
Mowing Recommendations............................................ 19
Pushing the Rider by Hand............................................21
Raise and Lower the Roll Bar........................................21
Attaching a Trailer.......................................................... 22
Checking / Adding Fuel.................................................. 22
Check Engine Oil Level..................................................22
Engine Maintenance.......................................................22
Fuse Location and Identification.................................... 22
Check / Fill Transmission Oil Level................................22
Purging the Air from the Hydraulic System.................... 23
Checking Tire Pressures................................................23
Seat Adjustment............................................................. 23
Ground Speed Control Lever Adjustment...................... 24
Cutting Height Adjustment..............................................24
Foot Pedal Adjustment...................................................24
Suspension Adjustment..................................................25
Storage........................................................................... 26

Maintenance Schedule....................................................... 27
Specifications......................................................................27
Warranty...............................................................................28

Warranty Statement........................................................28

Содержание ISX800Z Series

































Отзывы: