background image

Not for 

Reproduction

3

Thank you for purchasing this quality-built Ferris Commercial

Zero Turn Mower. We’re pleased that you’ve placed

your confidence in the Ferris brand. When operated and

maintained according to the manuals, your Ferris product will

provide many years of dependable service.
The manuals contain safety information to make you aware

of the hazards and risks associated with the unit and how

to avoid them. This Commercial Zero Turn Mower was

designed to be used as described in this operator's manual

and operated by trained professionals for finish cutting

of established lawns and is not intended for any other

purpose. It is important that you read and understand the

instructions thoroughly before attempting to start or operate

this equipment. Save these original instructions for future

reference.

Products Covered by This

Manual

The following products are covered by this manual: 
 5901828 

The images in this document are representative, and

are meant to complement the instructional copy they

accompany. Your unit may vary from the images

displayed. 

LEFT

 and 

RIGHT

 are as seen from the operator's

position. 

Ferris is a registered trademark of Briggs & Stratton

Corporation. 

Identification Tag Location

The Product Identification tag (A, Figure 1) can be found in

the location shown.

1

 

PRODUCT REFERENCE DATA

 

Unit Model Number: 
Unit Serial Number: 
Mower Deck Model Number:

(if applicable) 
Mower Deck Serial Number: (if

applicable) 
Dealer Name: 
Date Purchased: 
 

ENGINE REFERENCE DATA

 

Engine Make: 
Engine Model: 
Engine Type/Spec: 
Engine Code/Serial Number 

When contacting your authorized service dealer for

replacement parts, service, or information you MUST have

these numbers. 

Note: 

For the location of the engine identification numbers,

refer to engine owner's manual. 

The Illustrated Parts List for this machine can be downloaded

from ferrismowers.com. Please provide model and serial

number when ordering replacement parts. 

CE Identification Tag Markings

A.

Manufacturer's Identification Number

B.

Serial Number

C.

Manufacturer's Address

D.

CE Compliance Logo

E.

Year of Manufacture

F.

Sound Power in Decibels

G.

Maximum Engine Speed in Rotations per Minute

H.

Power Ratings in Kilowatts

I.

Mass of Unit in Kilograms

Содержание ISX800Z Series

































Отзывы: