Ferris 500S Series, Руководство оператора

Страница: 24 / 36

Not for
Reproduction
24 ferrismowers.com
Lubrication
Lubricate the unit at the location shown in the following
figures as well as the lubrication points listed below.
Grease:
• Mower deck spindles.
• Mower deck idler arm.
• Rear transmission cradle pivots (A, Figure 23).
• Front caster wheel axles (A, Figure 24).
Use grease fittings when present. Disassemble parts to apply
grease to moving parts when grease fittings are not installed.
Not all greases are compatible. Grease (p/n 5022285) is a
Calcium Sulfonate EP NLGI #2 grease that is recommended
and available through your normal parts source. Lithium
Complex EP-2 NLGI #2 grease may be used if 5022285 is not
available. Using a non-compatible grease could damage or
cause premature parts failures.
Oil:
• Deck lift linkage pivots.
• Discharge chute hinges.
Generally, all moving metal parts should be oiled where
contact is made with other parts. Keep oil and grease off belts
and pulleys. Remember to wipe fittings and surfaces clean
both before and after lubrication.
22
23
24
Servicing the Mower Blades
Removing the Mower Blades
CAUTION
Laceration hazard
Mower blades are sharp.
Always wear gloves when handling, or working near, mower
blades.
1. Use a block of wood to prevent the mower blade from
turning as shown in Figure 25.