background image

Not for 

Reproduction

11

Loss of control and roll-over hazard.

Operating on slopes can be hazardous and

cause loss of control and roll-overs.

• Do not operate on slopes over 10

degrees.

• Avoid sudden turns or rapid speed

changes.

• Reduce speed and use extreme caution

on slopes.

• Avoid turning down slopes; if possible

turn up slopes.

• If machine stops forward motion on a

slope, stop the blades and drive slowly

off the slope.

Water, retaining walls, and drop-off

hazards.

Wheels dropping over edges may result in

serious injury, death or drowning.

• Do not operate down slope towards or

near water, retaining walls, or drop-offs.

• Give yourself a minimum of two mower

widths of clearance around these

hazards.

 

WARNING

Fire hazard.

Gasoline is flammable. Yard debris is

combustible.

• Allow engine to cool for at least 3

minutes before refueling.

• Keep unit cleaned of debris.
• This equipment may create sparks that

can start fires around dry vegetation. A

spark arrester may be required. Contact

local fire agencies for regulations

relating to fire prevention requirements.

Avoid serious injury or death.

Read the operator's manual before using

this product.

• Do not operate this machine unless you

are trained.

• Know the location and function of all

controls.

• Keep safety devices (guards, shields,

switches, etc.) in place and working.

• Remove objects that could be thrown

by the blade.

• Be sure blade(s) and engine are

stopped before placing hands or feet

near blade(s).

• When leaving machine, shut off,

remove key, and set parking brake.

7101665 - Decal, Danger, Discharge

Safety alert triangle.

 

DANGER

Keep hands and feet away from deck.

Do not operate mower unless discharge

chute or entire grass catcher is in its proper

place.

Safety Icons for Optional Jack Kit

Accessory

An optional jack kit is available as an accessory through your

normal parts source. Please see the explanations below for

the safety icons displayed on the jack kit. 

 

Part Number:

 5105632 - Decal, Warnings, Svc Jack 

 

1.) Warning - Read the Operator's Manual. 

 

 

2.) Crushing Hazard, Mower:

 (1.) Park machine on flat

level ground and engage the parking brake; (2.) Stop the

engine and remove the ignition key; (3.) Properly jack the

machine and secure with jack stands before working under

the machine. 

Содержание 500S Series





































Отзывы: